Walkie Talkie codes Lingo

Walkie Talkie Lingo codes

As a kid, all of us have played with walkie talkies at one point. However, as we get older, we realize it is an incredibly powerful tool for many industries out there. Of course, it is virtually useless if you don’t know the walkie talkie communication lingo.

Don’t worry. We have a complete guide for you. Here is everything you have to know about walkie talkie communication.

Walkie Talkie Codes

Many people wonder one needs walkie talkie codes. After all, one can just talk normally, can’t they? However, radios don’t have the same high-quality audio as smartphones.

That’s why if you speak in a normal manner, some words may get lost on the way due to unclear transmission. That is why walkie talkie communication is short. Here are some of the standard walkie talkie codes you have to know:

  • Affirmative: Yes
  • Negative: No
  • Eyes on: When something or someone is spotted
  • What’s your 20: What is your location
  • Roger that or Roger: Message has been understood
  • Disregard: Ignore the previous message
  • Stand by: I am busy right now, I will call you as soon as possible
  • On it: I am doing what you asked
  • Go for “name”: Acknowledge “name” wants to contact me and I am listening
  • Loud and clear: Your radio is working properly
  • Go again or say again: Transmit your message again
  • Radio check or mic check: Is my radio working properly?
  • Do you copy: Can you hear me properly?
  • Over and out: Finished transmission and waiting for your reply

This entire communication lingo is incredibly important because it makes communication easier. All the codes are not more than two or three words because it allows for clear transmission. That way, the communication does not get distorted and things can be done in a much easier manner.

That is why you will always see law enforcement officials, military personnel, and security industries using walkie talkie for communication purposes.

Walkie Talkie Lingo For Militaries, Also Known As Ten Code Lingo

The Ten Code lingo was devised in 1937 in Illinois by police officers. The primary aim of creating this lingo was to make communication clear and quick. Sometimes the transmission was not completely clear, and so communication would get haphazard.

So, the 10-code was created to make everything easy. For this code, you just have to say ten and add a corresponding number next to it. Now the ten code is widely used by the military for better communication. Here are all the ten codes you have to know:

  • 10-1: Poor transmission
  • 10-2: Clear signal
  • 10-3: Abort the transmission
  • 10-4: Message has been received and understood
  • 10-5: Transmit or relay the message to someone else
  • 10-6: Stand by or busy
  • 10-7: Out of service
  • 10-8: In-service
  • 10-9: Repeat your transmission
  • 10-10: Transmission is complete
  • 10-20: What is your current location?

Military personnel uses high-quality radios (for example Hitera) because of the sensitive nature of their job. That is why their codes are even shorter so that everything can be done swiftly and quickly without any problems. The ten code lingo is used in all sensitive jobs where time is of the essence and communication is crucial.

Two-Way Radio Phrases List

Radio communication is not just about one person communicating the message. It is about making sure that everyone involved in the communication is on the same page. That way, everyone knows what is happening and no one is left out of the loop.

So, two-way radio communication lingo is also just as important as the others. Here is a list of some of the most common phrases used for two-way radio communication:

  • Roger so far: Confirming that you have understood the message so far through a long message
  • Come in: Asking the other person to acknowledge if they can hear you clearly
  • Radio check: How is the signal? Can you hear me?
  • Wilco: I will comply
  • Read you loud and clear: Your transmission is clear, I can hear you properly
  • Break, break: Interruption of a message to communicate an urgent message
  • Stand by: Wait for a while and I will get back to you
  • Emergency, emergency: Only needs to be used when immediate assistance is required as there is a danger to life
  • Wait out: Waiting has been longer than expected, I will get back to you as soon as I can
  • Say again: Repeat your last transmission

These compiled with the walkie talkie communication are essential phrases for two-way communication. The way this lingo is used differs from industry to industry as some may even add their own phrases to extend the communication.

Why Utilize Walkie Talkie Lingo for Communication?

Many people think that using walkie talkie communication is silly. However, it is not fun and games. Many industries depend on clear communication daily. Without this communication, all their operations would fall apart.

The problem is that radios don’t have the perfect audio quality you would expect. The fewer words are in radio communication, the better it is to understand what is being said. That is why you will never see people using walkie talkies talk normally.

They have their own communication lingo, and they use t without hesitation. Such lingo prevents problems and ensures that everything is being done. However, once you learn this lingo, you also need to understand how to speak clearly on a radio.

Understanding how to clearly speak so the other person can understand you is an art you have to familiarize yourself with. All you have to do is cue the mic, speak slowly, and enunciate every word you are speaking. After that, you can just end the transmission. So, the lingo is just as important as radio etiquette.

Final Words

That was your complete guide to using walkie talkie communication lingo. It doesn’t matter if you are in the UK or the US because everyone around the world uses this communication lingo. You can too if you are in an industry that uses radio communication. So, start talking the lingo now and you will be fluent in no time.

Previous Article

Leave a Reply

Your email address will not be published.